How to Install a Remote Car Starter?

Installing a remote car starter can be challenging if someone doesn’t have in-depth knowledge of a particular car’s wiring system. It is not a DIY that should be taken lightly. All the wires must be connected appropriately during the process. If the project isn’t done successfully, it will be risky both for you and your car. So, knowing how to install a remote car starter correctly is mandatory to avoid any risk.

What is a Remote Car Starter, and How Does It Work?

A remote car starter is a useful tool for a car. It is a wireless and radio-controlled tool connecting to ignition switch, power wire, ignition wire, starter wire, brake wire, ground wire, and tachometer wire that remotely starts your car. This car tool is handy if you live in extreme weather conditions where it is too cold.

Warm me - Remote Car Starter

Activating the car heater before you get in the car allows you to walk out to a toasty warm car in the winter. And this will happen with just a single push of the button. So, you have the privilege to start your car from the warmth of your home when it is too cold outside.

Although it looks like a simple tool from your end, there lies a very complex system inside the vehicle. Your car consists of lots of wires that are responsible for ignition.

As soon as you press the button on your remote start key fob, a signal is sent to the parts of the car. The remote car starter allows you to start the car engine without physically going to the car and inserting the key by turning on all necessary systems to start the engine and operate other functions like heating, cooling, etc.

The remote car system comprises two major parts: a control module and a remote transmitter. The control module is installed in your car, and it enables you to start your car remotely with the push of the button on the remote transmitter.

How to Install a Remote Car Starter

Essential Skills and Tools to Install Remote Car Starter

Is it hard to install a remote car starter? – No, it’s not if you have the proper idea about it.

Before installing the remote starter, you should have a piece of proper knowledge about automotive electronics and the science of electricity. Besides having proper theoretical understanding, you need to be able to read the electrical schematic. Moreover, you must know how to work with a multimeter and how and where to connect wires.

Go through the installation guidelines properly before installing the starter. So, you can determine the requisite tools to install the remote starter based on your vehicle model.

Finding the Right Remote Starter for Your Car

To install the remote car starter, first of all, you have to choose the appropriate tool which is compatible with your vehicle’s model. Most of the kits are available with everything you require. But you may have to add a few splicing and crimping tools.

Also, you can read our Best Remote Car Starter Reviews for getting the right one.

Basic Steps of Installation

First of all, you have to remove the lower dash under the steering wheel, and the remote starter has to be connected to multiple wires. All the wires need to be error-free. So, it’s better to test the wires before installation.

Basic Installation tips of Remote car Starter

After that, connect the ground wire to the chassis of the vehicle and also attach it to the starter to start the circuit.

In this stage, the ignition output from the remote starter has to be connected to the car’s ignition wire below the steering wheel. Then, place the starter wire and use a multimeter to test it.

Now, you should connect other components that apply to the specific remote starter. After that, connect the tachometer wire to the sensor.

You are almost done now. But before you end, connect the keyless entry, anti-theft, and other optional components and reconnect the car battery.


To avoid misidentifying the right circuit to tap into, first of all, you need to ensure that all the electrical components are in proper working order. So, you need to check your battery, lights, switches, and other systems. In case of any defect in any electrical component, you must fix it prior to installation.

Moreover, the remote car starter should not be placed in the engine compartment or any area where it will be exposed to extreme vibration or heat.

It is also suggested to test the system thoroughly after installing the remote car starter.

Remember that a simple mistake in the installation process can cause significant damage to your vehicle. Also, it may cost you a lot of money. That is why you have to be very cautious while installing it. And if you face difficulty, you should consult an expert.


Hopefully, you now have a clear idea about the remote car starter and how to install a remote car starter. Follow the procedure correctly for a successful installation of a remote car starter. And, then have a better and more comfortable car driving experience.

Also Read:

Leave a Comment

Your email address will not be published. Required fields are marked *